• About

Grayfeathersblog

~ Diabetes, Cancer Fighter, Father of Twins, Kayak Fishing, Woodcrafter, Lover of Life

Grayfeathersblog

Tag Archives: Sawdust

Have I Finally Found My “Big Hit”?

11 Sunday Oct 2026

Posted by Tim Hughes Living with CML in Uncategorized, Woodworking, Weather, Life, Arts and Crafts

≈ Leave a comment

Tags

Christmas, Crafts, Doctor, Heat, Lanterns, Life, Sawdust, Weather, Woodworking

Since I started doing craft work, I’ve always been looking for that one item that would put me on the map, so to speak. You know, that one creation that people see and just have to have.

I would go to a craft fair convinced that I had finally found that special item. I just knew people would see it, fall in love with it, and reach for their wallets faster than I could say, “That’ll be $25!”

Unfortunately, things didn’t always work out that way. I would come home disappointed because the item didn’t sell nearly as well as I had hoped, or sometimes it wouldn’t sell at all. Apparently, what I thought was a sure thing and what the customers thought were two entirely different things!

One thing I’ve learned over the years is that every craft fair is a gamble. Different shows attract different people, and what sells like hotcakes at one show might sit on the table collecting dust at another. You have to learn what people want and be willing to adjust accordingly.

My philosophy is pretty simple. If an item doesn’t sell well at the majority of the shows I attend, it might be time to take it off the shelf and come up with something new. There’s no sense in continuing to make something that people aren’t interested in buying. After all, this is supposed to be a business, not a hobby where I fill my garage with things nobody wants!

But something interesting has happened over the last couple of weeks.

I may have finally stumbled upon one of those items I’ve been searching for all these years!

I started making Christmas lanterns, and right now, I can hardly keep up with the orders. People are ordering them faster than I can make them, and I’m certainly not complaining about that!

At the moment, I have two designs available. I ordered another template yesterday that will give customers a third design to choose from, and within the next couple of weeks, I plan to add a fourth design to my inventory.

It’s exciting to see people responding so positively to something I’ve created. After all those craft fairs where I came home wondering what I needed to do differently, it’s nice to have the opposite problem for a change.

Of course, there is one little downside to all this success.

I’m so busy filling orders that I’m not building up the inventory I need for my upcoming craft fairs!

You just can’t win sometimes, can you?

Tomorrow, I’ll spend much of the day delivering orders. Then, on Tuesday, I have an afternoon doctor’s appointment, which means Wednesday will probably be the first opportunity I have to get back to making more items.

Meanwhile, the orders keep coming in!

I suppose there are worse problems to have, and I’m thankful that people like what I’m making enough to place an order. I just wish I could figure out how to add a few more hours to each day. I’ve tried staying up later, but eventually, my body reminds me that I’m not twenty years old anymore!

Another challenge I face is my workspace, or should I say, my lack of one.

I long for the day when I can move from this house to somewhere with a shop already in place or enough land for me to build one. Right now, my shop is the great outdoors.

That sounds wonderful until you consider the weather. If it’s too hot, too cold, or raining, I can’t get much done. And if you’ve been following my blog, you know how much I dislike working in extreme heat or cold.

The recent heat has put me way behind schedule. I’ve already missed a couple of craft fairs because I simply didn’t have enough inventory to make it worthwhile.

To give you an idea of just how far behind I am, my first craft fair this year was actually my fourth craft fair at that same point last year. That’s a pretty good indication that my production schedule needs some serious attention!

Now I have just a few weeks to play catch-up and get back on the ball. I need to fill the orders coming in, build up my inventory, and get ready for the craft fairs ahead.

And somewhere in the middle of all that, I need to find time to work on those new lantern designs.

I’m certainly not going to complain about having customers. Quite the opposite! After years of searching for that special item that people would be excited to buy, I may finally have found something that fits the bill.

Now I just have to figure out how to make enough of them!

So, if you happen to see me outside working on lanterns, don’t be surprised if I look a little tired, have sawdust on my clothes, and am mumbling something about needing a bigger shop.

I’m not sure whether these Christmas lanterns will turn out to be the big hit I’ve been searching for all these years, but the early signs are encouraging.

And if the orders keep coming, I may need to start asking Santa for a workshop instead of presents this Christmas!

Running on Faith, Coffee, and a Heating Pad

05 Tuesday May 2026

Posted by Tim Hughes Living with CML in Arts and Crafts, Family, Kayaking, Uncategorized, Weather, Woodworking

≈ Leave a comment

Tags

Adventurer, Back Ache, Breakfast, CERT, Craft, Doctor, Emergency, Family, Fishing, Flower Box, Flowers, Friends, Friendship, Gifts, Kayaking, Life, love, mental-health, Mothers day, Pain Management, Painting, Planter, Sanding, Sawdust, Storms, tornado, Training, writing

Today started at 4:00 a.m.

Not because I wanted it to… but because apparently my life has decided that sleep is optional now.

I got up, got moving, and made my way across town for my 6:00 a.m. Bible study. There’s something about starting your day that early that makes you feel accomplished… and slightly confused about what day it actually is.

After that, I met up with my fishing buddy Rick for breakfast. Not long into it, my brother-in-law showed up—another fisherman, and to make things worse (or better, depending on how you look at it), he lives on the river.

So naturally, what was supposed to be a quick breakfast turned into a full-blown fishing summit.

We sat there long after the plates were cleared, swapping stories about recent trips and, of course, honoring the sacred tradition of talking about “the one that got away.” I’m convinced those fish get bigger every time we tell the story.

They started talking about the next fishing trip, and I had to sit that part out—for now. I’ve got a pain block scheduled this Thursday, and I’m hoping it gives me enough relief to get back out on the kayak soon. Because right now, the only thing I’m catching is back pain.

The afternoon was spent in the shop creating a respectable amount of sawdust, which is my way of saying I worked hard but also made a mess I’ll deal with later.

Then it was off to my CERT class this evening—our final one. For the past nine weeks, we’ve been learning how to respond in emergencies, and this Saturday is the big test and drill. Not just a written test either… we actually have to prove we’ve been paying attention.

No pressure.

Somewhere in the middle of all this, I’ve been working on a Mother’s Day gift for my mom. I had a bigger idea planned, but after looking at it… and looking at it again… and then criticizing it like only I can, I decided to pivot.

My wife says it looked fine.

I say it looked like a future “learning experience.”

So I scaled it down to something simpler, and honestly, it’s going a lot better. I’ve got most of it done—just some sanding and paint left. If all goes well, I should have it finished tomorrow.

Speaking of tomorrow… the weather has decided to add a little excitement back into the schedule. There’s a risk of severe storms, including tornadoes.

That’s something that always hits a little differently.

Back in 2011, our town was devastated by a tornado. Our home was spared, but many weren’t. Lives were lost, and that’s something you don’t forget. So yeah, when the meteorologists start using words like “rotation” and “severe,” my anxiety tends to show up right on time.

If everything goes according to plan, I’m hoping for a little reward at the end of this week. If the pain block works, I may try to get back out on the water on Friday. After the CERT drill on Saturday, I’ll handle any last-minute touch-ups on Mom’s gift—if needed.

It’s been a long day. The kind that starts early, ends late, and somehow still feels like there’s more to do.

But it’s also been a full day.

And I’ll take that—even if it comes with a 4:00 a.m. alarm clock and a recliner waiting on standby.

Making Sawdust

23 Wednesday Jan 2019

Posted by Tim Hughes Living with CML in Photography, Retirement, Woodworking

≈ Leave a comment

Tags

Frame, Picture, Power Tools, Projects, Retirement, Sawdust, Shop, Tools, Woodworking

2018-11-28 14.14.17

I must admit since I got married, I have been collecting woodworking tools but I have never been able to find the time to work with them.  I guess my first tool was the table saw, then a few small power tools like a drill, a Skill saw, a Miter saw and the list goes on.  Right now I have so many cordless drills that I can’t keep the batteries up on all of them and they all die.  In fact, I just ordered two new batteries for one of my more heavy duty drills.

Most of my drills came from when I worked.  At first, the company would supply us with cordless drills but when I went to use one, either I couldn’t find one or when I did the batteries were dead because the last person who used it didn’t put it back on charge.  I soon started buying all my tools that way I could lock them all up and they would be there when I needed them.

Anyway, now that I’m retired, I’ve started working on some small projects that were either needed around the house or projects that I’ve seen that I think I could sell at some craft shows.  My first project was, of course, the picture frame.  When I first started making the frames, I just couldn’t get it right.  I was using my miter saw that I bought some twenty years ago, cutting on a forty five but when putting everything together, the last corner was nearly a quarter of an inch off.  I couldn’t figure it out.  I watched Youtube videos on the subject, I was doing everything right but no matter what I did, I was still a quarter inch off on the last corner.

A few years after moving in this house, my dad and I extended our deck on the back of the house.  My dad is a real craftsman.  I’m just an imitation compared to him.  My dad, in order to help with some of the cuts, bought a miter saw large enough to cut some of the six by six posts that were required to build my deck.  After having all the trouble with my cuts for my frame, I decided to do a couple of cuts using his saw, being that he never took his saw home.  I want you to know that that was the prettiest frame that I had made.  The forty-five’s fit nearly perfect.  I went back to my saw and realized that when cutting a forty-five, the blade was square at the fence but as it moves toward the outer edge, it was out at least one-sixteenth of an inch.  When you add all that up, that’s at least one-quarter of an inch out.  No way to fix the saw.  There’s no adjustment for that.  I know.  I took the saw to have someone look at it and there’s no way to fix this.  Luckily, I have my dads saw and the last time I talked to him, he’s given me this saw.

Now that I’ve got a saw that cuts a good forty-five, I started making frames, and a bunch of them too.  All shapes and sizes.  I use plexie glass and real glass.  I’ve even got my mat cutting equipment and different colored mats.  I have a driver tool to hold the picture in the back of the frame.  I have everything needed to make and sell picture frames. And I got bored.

2018-12-31 18.06.33

Next up, a paper towel holder.  Or a poor excuse for one.   The plans call for a jigsaw, which I have, to cut the pattern out.  But, for some reason, I keep burning the curves.  I have a jigsaw that has a scroll feature on it but I haven’t been able to master it yet.  I also have a router and I used a trim bit but it ended up tragically.  It was my first try and I’ll try again I get the nerve.  It was pretty scary, to say the least.  It was so bad that my son, who was helping me at the time, said “Dad? “I don’t think that was supposed to happen”   No crap!!.

2019-01-16 16.36.37

Next up, clothes hamper.  Made from recycled pallet wood.

Don’t look too much at the lid.  I am still working on it.  In fact, I’m still working on all of it.  I’ve spent the last few days sanding on it.  If I had known that my wife wanted it sanded and stained, I would have done the sanding on my bench sander before nailing it all together.  Oh well, It’s giving me something to do.  If everything works according to plan, I should finish sanding tomorrow and start the staining process.

I look at sites such as Esty.com and see some of the prices these people want for items such as this and I think they must be crazy for asking for such an outrageous price.  But, going through everything that I’ve done just to get this far, I’ll have to say that they should be asking for more.  According to Esty, the picture frame should go for $35, the paper towel holder $75 and the clothes hamper $175.  Do I think I’ll get that much?  Probably not.

I’ll up date on both, the clothes hamper and the paper towel holder when they’re finished.  I think my next project will be a much needed foil rack for one of the cabinets.

Life Goes On.

Blog Stats

  • 18,599 hits

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 55 other subscribers
Follow Grayfeathersblog on WordPress.com

2015

October 2026
M T W T F S S
 1234
567891011
12131415161718
19202122232425
262728293031  
« Sep    

Blog at WordPress.com.

  • Subscribe Subscribed
    Grayfeathersblog
    Join 55 other subscribers

    Have a WordPress.com account? Log in now.

  • Grayfeathersblog
    View site in Reader
    Manage subscriptionsSign upLog in
    Report this content
    Collapse this bar
Loading Comments...